Click Advanced -> Actions -> Install USB Drivers.
Note: For the best results, plug the MULTI-Module in before installing the drivers. The MULTI-Module USB drivers, which are used by many MULTI-Modules, including original Jumper JP4IN1 modules, iRangeX IRX4 and IRX4+ modules, and all Banggood STM32 modules, can be installed directly from Flash Multi. Launch the application by running flash-multi.exeĭepending on your MULTI-Module and version of Windows you may need to install additional drivers manually.
Unzip the zip file to a convenient location.Download flash-multi-.zip from the latest release.Tip: When you launch Flash Multi it will tell you if you need to install or upgrade your. You probably already have a compatible version installed, but if not, the latest version can be downloaded from Microsoft. Flash Multi Requirementsįlash Multi requires. Subsequent updates can then be installed from the radio. If your MULTI-Module has MULTI-Module firmware v1.2.1.51 you must use Flash Multi and a USB-to-serial adapter to update it one time, as explained here. If your internal module has MULTI-Module firmware v1.2.1.85 or newer, and the radio is running OpenTX v2.3.2 or newer, you can update the internal module from the radio using this process. 'Banggood' STM32 and ATmega328p MULTI-Modulesįlash Multi cannot be used to update the internal module in a Jumper T16 by connecting to the radio's USB port.Jumper T16 Pro internal modules - only with a USB-to-serial adapter.OrangeRX modules are not supported (yet).